Notice of Applications for Modification of Exemption

Summary:

In accordance with the procedures governing the application for, and the processing of, exemptions from the Department of Transportation's Hazardous Materials Regulations (49 CFR part 107, subpart B), notice is hereby given that the Office of Hazardous Materials Safety has received the applications described herein. This notice is abbreviated to expedite docketing and public notice. Because the sections affected, modes of transportation; and the nature of application have been shown in earlier Federal Register publications, they are not repeated here. Requests for modifications of exemptions (e.g. to provide for additional hazardous materials, packaging design changes, additional mode of transportation, etc.) are described in footnotes to the application number. Application numbers with the suffix “M” denote a modification request. These applications have been separated from the new applications for exemptions to facilitate processing.

Dates:

Comments must be received on or before August 8, 2001.

Address comments to:

Records Center, Research and Special Programs Administration, U.S. Department of Transportation, Washington, DC 20590.

Comments should refer to the application number and be submitted in triplicate. If confirmation of receipt of comments is desired, include a self-addressed stamped postcard showing the exemption number.

For further information:

Copies of the applications are available for inspection in the Records Center, Nassif Building, 400 7th Street SW, Washington, DC or at http://dms.dot.gov.

This notice of receipt of applications for modification of exemptions is published in accordance with Part 107 of the Federal hazardous materials transportation law (49 U.S.C. 5117(b); 49 CFR 1.53(b)).

Issued in Washington, DC, on July 19, 2001. J. Suzanne Hedgepeth,

Director, Office of Hazardous Materials Exemptions and Approvals.

Application No.Docket No.ApplicantModification of exemption
1To modify the exemption to authorize the transportation of an additional Division 1.3C material in temperature controlled equipment.
2To modify the exemption to provide for germanine mixtures, Division 2.3, to be transported in DOT-Specification 3A2400, 3AA2400 or 3AAX2400 cylinders.
3To modify the exemption to authorize the use of additional design assemblies of the non-refillable, non-DOT specification steel cylinders for the transportation of certain Division 5.1 materials.
4To modify the exemption to authorize the transportation of an additional Division 2.2 materials in non-DOT specification IMO Type 5 portable tanks.
5To modify the exemption to authorize the transportation for disposal of unapproved waste explosive materials used in passive restraint systems by common carrier and relief from the outer packaging requirements.
6To modify the exemption to authorize the transportation of an additional Division 2.2 material in non-DOT specification fully wrapped carbon fiber reinforced aluminum lined cylinders.
7To modify the exemption to authorize the transportation of additional Class 3 material in tank cars authorized to remain standing with unloading connections attached when no product is being transferred.
8To modify the exemption to authorize the transportation of additional Class 8 materials in certain DOT Specification and AAR Specification tank cars with a modified inspection procedure.
9To modify the exemption to authorize an increase in the maximum capacity to 500 gallons of the non-DOT specification cargo tanks used for roadway striping.
10To modify the exemption to authorize the use of a hydrostatic proof pressure test of the non-DOT specification pressure vessel for use in transporting Division 2.1 an 2.2 materials.
11To modify the exemption to authorize rerouting a Division 2.3 residue tank car for reloading at a different site while the car is in transit without change of placard and the addition of a Division 2.3 material.
12To reissue the exemption originally issued on an emergency basis for the transportation of a Division 2.2 material in a non-DOT specification refrigeration system described as a pulse tube cooler.
13To reissue the exemption originally issued on an emergency basis for the use of a non-DOT specification full removable head steel salvage cylinder for overpacking and the transportation of damaged or leaking cylinders of pressurized and non-pressurized hazardous materials.
14To modify the exemption originally issued on an emergency basis for the transportation in commerce of a Class 8 material in drums that do not meet the minimum thickness requirements.
5022-M Thiokol Propulsion Corp., Brigham City, UT (See Footnote1) 5022
7954-M Voltaix, Inc., North Branch, NJ (See Footnote2) 7954
8971-M Baker Atlas, Houston, TX (See Footnote3) 8971
9401-M Societe Nationale de Wagon-Reservoirs, 79009 Paris, FR (See Footnote4) 9401
10842-M Autoliv ASP, Inc., Ogden, UT (See Footnote5) 10832
10945-M Structural Composites Industries, Pomona, CA (See Footnote6) 10945
11434-M Fisher Scientific Chemical Division, Fair Lawn, NJ (See Footnote7) 11434
11761-M Hawkins, Inc., Minneapolis, MN (See Footnote8) 11761
12284-M RSPA-99-5935 American Traffic Safety Services Assn. (ATSSA), Fredericksburg, VA (See Footnote9) 12284
12449-M RSPA-00-7213 Chlorine Service Company, Inc., Kingwood, TX (See Footnote10) 12449
12595-M RSPA-01-8643 Marsulex, Inc., Toledo, OH (See Footnote11) 12595
12643-M RSPA-01-9066 TRW Space and Electronics Groups, Redondo Beach, CA (See Footnote12) 12643
12676-M RSPA-01-9376 Environmental Management, Inc., Guthrie, OK (See Footnote13) 12676
12688-M RSPA-01-9530 Brenntag West, Inc., Santa Fe Springs, CA (See Footnote14) 12688

References

Loading most recent entriesloading

Feedback